Bags, Crates, and Cords: Your Friendly Guide to Measuring Firewood Volumes
If you have ever ordered firewood for your stove, you will know the slight sense of bewilderment that comes with comparing suppliers. One merchant quotes for a "builder’s bulk bag", another sells by the "hand-stacked wooden crate", while an old-school timber merchant down the road speaks strictly in "cords" or "face cords". Then, of course, your neighbour might casually tell you they buy two cubic metres a year, leaving you wondering why no two businesses seem to talk about timber using the same language. It is easy to feel as though you are comparing apples with wheelbarrows.
Buying firewood should not feel like an advanced mathematics exam. However, because wood is an irregular, natural product with plenty of air pockets between logs, calculating the true amount of burnable fuel you receive requires a bit of know-how. When you plan your seasonal heating budget, running the numbers through an intuitive firewood calculator helps clear the fog, but understanding the physical measurements behind those calculations is equally vital. In this guide, we demystify crates, bags, stere volumes, and cords so you can buy with total confidence and ensure your log store remains brim-full of cosy warmth throughout the chilliest British months.
The Great Muddle: Why Firewood Isn’t Sold by Weight
When you pop down to the shops, most things are sold by weight or neat liquid measures: a kilogram of potatoes, a litre of milk, a ten-kilo sack of coal. It is tempting to assume firewood works the same way. Why not simply drive a lorry full of logs onto a weighbridge, note the tonnage, and tip it onto the driveway? The answer lies in one critical factor: water.
Freshly felled timber (often called green wood) can carry a moisture content of anywhere between 45% and 60%. As timber seasons naturally or goes through commercial kilns to meet the UK’s stringent Ready to Burn standards, that moisture drops below 20%. A single unseasoned ash or oak log will weigh significantly more than an identical log dried to 15% moisture content, yet the lighter, dried log will produce vastly more heat for your home. If suppliers sold firewood by the tonne, unscrupulous dealers would have an incentive to sell you waterlogged timber, because wet wood weighs heavy on the scales.
To protect consumers, the industry standardises firewood trade by volume rather than mass. However, volume brings its own quirks, primarily because logs can be tossed loosely into a bag or packed tight like a three-dimensional jigsaw puzzle. This brings us straight to the difference between stacked and loose volume.
Loose vs Stacked Volumes: The Void Factor Explained
If you remember only one principle from this guide, make it this: a cubic metre of thrown logs is not the same as a cubic metre of neatly stacked logs. This fundamental reality causes more misunderstandings between householders and log merchants than anything else.
When firewood is tipped into a delivery lorry, dumped into a loose pile on your gravel, or dropped via a conveyor belt into a bulk bag, logs fall haphazardly at odd angles. They cross over one another, catch on bark, and create generous gaps of empty air called voids. This is known throughout the industry as a loose cubic metre (often referred to on the continent as a schüttraummeter).
Conversely, when you take those identical logs and stack them methodically into your garden log store—parallel rows, ends touching, resting flush against one another—those air voids shrink dramatically. The stack condenses. A loose cubic metre of typical 25cm (10-inch) logs shrinks down to roughly 0.6 to 0.7 of a stacked cubic metre. You have not lost any wood; you have simply removed the trapped air.
| Measurement Type | Air Void Ratio (Approx.) | Equivalent Stacked Volume | Typical Format |
|---|---|---|---|
| Loose / Thrown Volume | 40% – 50% Air | 0.60 – 0.65 m³ | Tippers, Loose Bulk Bags |
| Hand-Stacked Crate | 25% – 30% Air | 1.00 m³ | Timber Crates, Palletised Boxes |
| Solid Timber Equivalent | 0% Air | 0.40 – 0.45 m³ | Solid tree trunk before felling |
If you order a loose cubic metre and then find it only fills two-thirds of your one-metre-wide, one-metre-tall, one-metre-deep shed, rest assured you haven't been shortchanged. It is the natural physics of tessellation at work.
The Mystery of the Builder's Bulk Bag (Dumpy Bag)
Walk around any UK neighbourhood in October or November, and you will see square woven polypropylene sacks sitting on driveways. These are affectionately known as "dumpy bags", "tonne bags", or "builder's bags". They are common, practical, and easy to offload using a tail lift or hiab crane. But how much wood is actually inside them?
Despite often being marketed casually as a "tonne bag" because builders use them to haul aggregate or sand weighing roughly 850kg to 1,000kg, a dumpy bag filled with dried firewood weighs nowhere near a tonne. Kiln-dried logs inside such a bag will usually tip the scales at somewhere between 200kg and 250kg.
More importantly, dumpy bags vary in volume. While standard builder bags have external dimensions of 85cm x 85cm x 85cm, giving an external geometric volume of roughly 0.61 cubic metres, others measure 90cm x 90cm x 90cm (about 0.73 cubic metres). Because firewood within these bags is virtually always loose-thrown, the actual stacked firewood volume inside a standard dumpy bag is usually around 0.45 to 0.50 stacked cubic metres.
When you are tallying your supplies, never treat a dumpy bag as a full cubic metre of logs. If your seasonal goal is two cubic metres of neatly stacked wood, you will need roughly four standard dumpy bags to reach that figure.
Wooden Crates: The Neat Stacked Gold Standard
In recent years, imported and domestic timber crates have become exceptionally popular across Britain. These are rigid wooden frames constructed on sturdy pallet bases, filled with split logs stacked tightly by hand before transport. They commonly come in half-crate, full-crate, and extra-large crate sizes.
The enormous advantage of crates is transparency. Because the logs are already packed tight at the mill, you are purchasing stacked volume rather than loose volume. A crate with internal dimensions of 1m x 1m x 1m gives you a genuine stacked cubic metre. If you were to unpack that single 1m³ crate and toss the logs loosely onto the lawn, the messy pile would measure between 1.5 and 1.6 loose cubic metres.
Crates make planning simple. If your wood store measures two metres long by one metre high and fifty centimetres deep, that equals an internal volume of 1.0 m³ (2 x 1 x 0.5). A single 1m³ crate will fill your store almost to the millimetre. Understanding this difference helps you compare prices realistically: a crate that appears 30% more expensive than a loose-tipped load often turns out to be better value per usable log.
What on Earth is a Cord? (And a Face Cord?)
Mention a "cord" to a woodburner in North America or an experienced country forester in the UK, and they will know exactly what you mean. Mention it to a suburban homeowner, and they will likely look bewildered. Although modern metric measurements have largely superseded imperial terms in retail fuel sales, cords still crop up in country sales, forestry contracts, and online forums.
A full cord is an imperial unit of measurement defining a neat, stacked pile of logs measuring 8 feet long, 4 feet high, and 4 feet deep. Doing the sums gives a total volume of 128 cubic feet, which translates to roughly 3.62 stacked cubic metres. A true cord is a massive quantity of wood, representing an impressive winter stockpile for most residential homes.
Then there is the infamous "face cord" (sometimes called a rick). A face cord measures 8 feet long by 4 feet high, but instead of being 4 feet deep, it is only as deep as the length of a single log—typically 12 to 16 inches. As a result, a face cord is roughly one-third of a full cord, delivering approximately 1.2 stacked cubic metres. When buying from traditional suppliers who still trade in cords, always clarify whether they mean a full cord or a face cord; confusing the two can leave you with either three times more timber than fits in your shed, or a third of what you expected.
Netted Bags: Convenience vs Cost per Log
Nearly everyone has grabbed a netted bag of birch or kiln-dried ash from a garage forecourt, garden centre, or farm shop on a freezing Friday afternoon. Netted bags are portable, mess-free, and fit into the boot of an ordinary family car without trailing sawdust over the upholstery.
Nets are typically sold in sizes of 22 to 30 litres (0.022 to 0.030 m³). A standard 22-litre bag typically holds between 7 and 10 split logs, depending on their girth. While perfect for spontaneous weekend fires, chimineas, or fire pits, relying on netted bags to run a primary heating appliance through an entire UK winter is notoriously expensive.
To put it into perspective, it takes around 35 to 40 standard netted bags to equal the burnable timber inside a single 1m³ hand-stacked wooden crate. When you factor in the retail markup and plastic packaging, purchasing by the net can cost up to two or three times as much per kilowatt-hour of heat as buying palletised crates or loose bulk loads.
How Many Logs in a Cubic Metre?
This is the question every woodburner asks: "How many actual logs will I get to burn?" The answer depends on three factors: the length of the logs, their split diameter, and whether the volume is loose or stacked.
The standard stove log across the UK is 25cm (roughly 10 inches) long, with a cross-section diameter of 8cm to 14cm. Given these dimensions:
- In a 1.0 m³ Hand-Stacked Crate: You can expect approximately 380 to 450 logs. Because the logs are laid straight and close, the packing efficiency is high.
- In a 1.0 m³ Loose-Tipped Load: You will generally find around 240 to 280 logs. The extra void spaces mean fewer physical pieces fit into the same overall space.
- In a Standard Builder's Bulk Bag (approx. 0.65m³ loose): You will usually receive between 150 and 190 logs.
Keep in mind that these numbers adjust based on timber thickness. Chunky, slow-burning hardwood logs mean fewer total pieces but extended burn durations, while smaller logs give you a higher piece count that burns down more rapidly. For a deeper breakdown of how firewood variety and species density affect real-world burn times, take a look at our companion piece on hardwood vs softwood burn time.
Measuring and Calculating Your Own Log Store
Before placing any order, spend five minutes with a tape measure around your log store. It avoids the misery of standing in the rain trying to find a home for fifty loose logs that refuse to fit under the eaves of your woodshed.
Calculating the usable capacity of a rectangular shed is simple: multiply length by width by height in metres.
Example Calculation:
Your log store measures 1.8m wide, 0.6m deep, and 1.2m high.
1.8 x 0.6 x 1.2 = 1.296 cubic metres of storage capacity.
Remember that this calculation yields your stacked capacity. If your store measures 1.3 stacked cubic metres, it will comfortably swallow:
- A single 1.2m³ hand-stacked crate; OR
- Approximately 1.8 to 2.0 loose cubic metres tipped onto your drive; OR
- Two to three standard builder's dumpy bags.
Always leave a small air gap—at least 5cm—between your wood stack and the back wall of the shed. Good airflow is essential to prevent moisture accumulation, even with kiln-dried firewood.
Smart Shopping: A Checklist for Ordering Logs
When you are ready to restock for the winter season, run through this quick checklist with your prospective supplier to ensure you get full value for your hard-earned money:
- Ask for volume specifics: Are they quoting in loose cubic metres or stacked cubic metres?
- Verify bag dimensions: If ordering dumpy bags, ask for the exact measurements of the sack (e.g., 85cm x 85cm x 85cm vs 90cm x 90cm x 90cm).
- Confirm log length: Make sure the logs are split to an appropriate size for your stove firebox. Most modern stoves require 25cm (10 inch) logs, though smaller multi-fuel models occasionally need 20cm cuts.
- Check certification: Ensure the timber carries the certified "Ready to Burn" stamp, verifying the moisture content is below 20%.
- Calculate delivery access: Bulk crates and dumpy bags require flat, solid terrain (concrete, tarmac, or smooth paving) for pallet trucks to maneuver safely. Gravel drives usually require a crane offload or manual barrowing.
Knowing your volumes transforms firewood shopping from guesswork into a simple, practical task. By measuring your log store, distinguishing loose loads from stacked crates, and planning your deliveries well ahead of the first cold snap, you can sit back and enjoy a roaring fire all winter long, confident that every penny spent has gone straight into genuine home comfort.
